Mimetrix Technologies | A THINK-AHEAD ENGINEERING COMPANY
 
REGENERATORS / REPLICATORS
HOME / PRODUCTS / REGENERATORS/REPLICATORS
 
 

Mimetrix

Complete network visibility requires access to all network segments and often requires multiple copies of the same signal to feed a variety of analytic devices. The “TAPPED” signal will often need to be regenerated in order to replicate the signal. Mimetrix offers a broad range of regenerators and replicators all with ultra-low latency. Whether your monitoring requirements are for 2 copies or 32 copies, 1 GIG or 100 GIG, single-mode or multi-mode we have a solution for you.

SA-3R-4W
The SA-3R-4W is a 1U, 19” rack-mount device intended to monitor up to eight (8) optical inputs and provides four (4) regenerated copies of each input. The optical inputs may be any protocol and any rate between 155 Mbps and 11.1 Gbps. Regeneration is ‘3R’, meaning that the monitored inputs are fully reshaped, retimed, and jitter-attenuated. Available in Single-mode or Multi-mode modules each module will support four (4) input signals and provide four (4) regenerated copies or with the SA-3R-8W model it will supply eight (8) copies of the input signal.

SA-REP-4A-A
The SA-REP-4A-4 is a single-mode signal amplifier providing 4 copies of the input signal. This design is speed and protocol agnostic. Supports 1 GIG to 100GIG applications for Ethernet, SONET/SDH, OTN or Fiber Channel or any single-mode application. Modules for either O-Band or C-Band and is available with an optional internal passive TAP.

SA-REP-1A-4
The SA-REP-1A-4 is a single-mode signal amplifier providing up 32 copies of an input signal all at ultra-low latency (1.5 Nanoseconds). The input signal (Rx) is amplified and the output (Tx) is sent to a Mimetrix Splitter Shelf which can produce 8, 16 or 32 copies. Typical use for Market Data Feed replication or any single-mode signal replication where more than 4 copies are required.

 

Modular Splitter Assemblies
The Mimetrix Modular Splitter product line is a 1U shelf with 2 module slots. Available modules are; 1 x 64, 1 x 32, (2) 1x 16 or (4) 1 x 8. Modules can be mixed in the same shelf. This unique design can be used in conjunction with the Mimetrix SA-MDF-4-B or as a standalone splitter solution for typical splitter requirements. Standard connectors are LC and can be ordered in either single-mode of multi-mode varieties.

SA-1X64R
Single Input fiber copied to 64 outputs.

SA-2X32R
Single Input fiber copied to 32 outputs. (2) Modules per chassis.

SA-4X16R
Single Input fiber copied to 16 outputs. (2) 1x16 splitters per module, (2) modules per chassis.

SA-8X8R
Single Input fiber copied to 8 outputs. (4) 1x8 splitters per module, (2) modules per chassis.

SA-1X4-120S
Single Input fiber copied to 4 outputs. (8) 1x4 splitters per module, (3) modules per chassis.

 

CATEGORIES
 
> Optical TAPs
> Regenerators/Replicators
> TAPatch™ Cassettes
> Monolithic Tap Assemblies
> Cables Assemblies
> Cassettes & Enclosures
> Layer 1 Switches
> Network Recorders
> Ethernet Layer 2/3 Testers
> Test Lab Automation
> OPENFLOW Ethernet Switches
> Network Emulators
 
DOWNLOADS
 
PDf SA-3R-4W | 1x4 Splitter- Regenerator- Multicast

-
REQUEST A QUOTE

Name:


Company:


Email:


Phone:


Description:


 


©2014 Mimetrix Technologies. All Rights reserved. Privacy Policy & Terms  
11160 C1 South Lakes Drive | Suite 190 | Reston, VA 20191 Facebook    LinkedIn    Twitter Back to Top
(571) 306-1234 | info@mimetrix.com